Insulation boards vary in thickness (20-200 mm) and Lambda values (0.035 or 0.027 W/mK), tailored to the desired energy values. Grout is supplied in a colour of your choice.
Aluminium start profile
Supplied individually (length: 2.5 lm) with embedded drip edge. Screw plugs are included for fastening. Prescribed quantity: 10 per 2.5 m start profile.
Universal screw and/or hammer plugs
Supplied with adapted rosas and according to the board thickness (adapted to the underlying surface). These plugs include a special cover cap to avoid any thermal bridging with the screw (ETA-certified). The quantity depends on the surface. Prescribed quantity: 3 pieces per insulation board* or 4 pieces per m².
*Wood: 4 pieces | *Ceiling: 6 pieces
Adhesive mortar
The choice of adhesive mortar depends on the surface that the insulation boards are attached to. The adhesive is supplied in bags (Flex-Kleber) for rocky surfaces and in buckets for wooden surfaces (Dispersion-Kleber).
Iso-Façade boards
In XPS extruded polystyrene, thickness from 20 to 200 mm depending on the desired insulation value. Supplied with pre-milled joints by default. Supplied without joint lines For the 'bonded masonry' appearance.
Stone and corner strips
Stone strips have a standard thickness of ±2 cm. The full range consists of more than 100 colours for you to choose from.
Discover the entire range here
Prefabricated SEIFERT® quality grout
Adapted to the warranty statement and compatibility with the adhesive mortar of the overall system. Water-repellent, colourfast and available in all colour shades.
Compriband
Use of the Compriband is mandatory. Recommended by the manufacturer at joints between the XPS insulation and a foreign material such as windows, doors and window sills, as well as at expansion joints or other construction joints. The compriband should always be driving rain-resistant, water vapour-permeable and pre-compressed. One roll of Compriband is eight metres long .
Drills and bits
Supplied free of charge, subject to the thickness of the insulation boards. The manufacturer recommends using these during assembly.